Results 1 to 20 of 56

Thread: 2.3-16 Project

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Dec 2014
    Location
    Seattle, WA
    Posts
    59

    2.3-16 Project

    I thought I'd introduce myself (by "myself" I mean my 190...)

    I had been searching for a 2.3-16 project for quite some time, and finally found, what I think to be, a good candidate.

    http://i.imgur.com/iUiYiXw.jpg

    The compression is down in the #1 cylinder. I pulled the valve-cover off while diagnosing and quickly found the cams to be off. I instantly feared the tensioner was shot and the engine was doomed with a bent valve or 8. However at TDC I found that each cam was off by one tooth. The exhaust was offset clockwise (early)... the intake counterclockwise (late). Fortunately this actually puts the motor FURTHER from piston/valve contact, so I stopped worrying. I suspect that the motor was rebuilt (the head is SPOTLESS inside) and simply assembled incorrectly. The sprocket alignment holes are in fact ACROSS from each other at TDC... just not across from each other at the centerline of the cams. :/ I set it right last weekend

    The intake sprocket looks terrible (thrust wear from the chain) so I'm hoping to find a good used one. Other than that, it goes into the garage this weekend to pull the motor! Time to get that compression up across all 4 pots.

    I've had some great insight and feedback from some local owners via this forum. So, thanks!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	iUiYiXw.jpg 
Views:	114 
Size:	114.7 KB 
ID:	9799  

Similar Threads

  1. Project 24
    By 202brabus in forum Member's Rides
    Replies: 320
    Last Post: 02-19-2018, 03:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •